RECHARGING YOUR BATTERIES KEEPS YOU GOING. HAVING A MIX OF SPACES WHERE YOU CAN GET AWAY FROM THE DESK PROMOTES HEALTHY WORK HABITS AND ENHANCES THE OVERALL WELL-BEING OF THE WORKPLACE.  Learn More

Spontaneous collaboration is a gateway to innovative and new ideas. Breakout spaces harness that energy, providing the right tools to keep you and your peers going.  Learn More

Touchdown spaces energize the way you work, offering the essential workplace tools to meet the needs of new and evolving workstyles.  Learn More

The workplace, open to all and designed to encourage both serendipitous and planned interactions. Furnishings in these spaces range from informal seating and small tables to lounge furniture groupings to standing height counters with stools. Shared spaces that are used for social activities and encourage spontaneous, flexible use.

View the full presentation...

Meeting spaces have always been a crucial part of the workplace. Dress them up or down with a combination of furniture and new technologies.  Learn More

Muuto is rooted in the Scandinavian design tradition characterized by enduring aesthetics, functionality, craftsmanship and honest expression. The Fiber Armchair is made from an innovative material with up to 25% wood fiber. The fibers become visible when viewed up-close, giving it a contemporary character and unique texture. 

David Adjaye's cantilevered chairs establish a play between propping and balancing so that they are simultaneously functional and sculptural. Washington Skeleton™ is reduced to a fine geometric lattice while its inverted counterpoint, Washington Skin™, offers a colorful envelope to the same form.
Skeleton's cast-aluminum frame is available with an outdoor powder coat paint finish or copper plating (copper not suitable for outdoor use). The copper plating will patina with time.

The D’Urso Swivel Lounge strikes a playful balance between utility and whimsy, bringing a modern twist to the cocktail lounge seating category that is perfect for today’s more relaxed workplace or hospitality setting.

Perch proves that sometimes simple can be brilliant. It is functional in collaborative areas as well as smaller workstations. When the conversation ends, Perch moves easily under the counter, into the corner, or along the wall, waiting patiently out of the way until it’s needed again.

The Jehs+Laub Collection for KnollStudio, inspired by the structure and geometry of earlier Knoll designs by Mies van der Rohe, Florence Knoll and Harry Bertoia, is the latest in a long and distinguished line of Knoll lounge furniture. The sweeping form of the Lounge Chair features a streamlined profile and a composed, inviting interior inspired by traditional quilting.

Love at first glance. With one look, Nadia’s clean profile, timeless design and stunning details might just steal your heart. Inspired by the organic, soft lines found in nature, Nadia combines natural materials, time-honored woodworking techniques and the latest technologies to deliver a chair that’s as functional as it is stunning. Exposed finger joints transition to gracefully tapered legs, lending to Nadia’s unique, organic curves and instantly likable appearance.

Make it your own. Choose your frame from a variety of natural wood finishes and lacquers, as well as a chrome or powder coated metal base. Pair it with a bentwood or fully upholstered seat to give Nadia a look that’s all your own.

Designed in 1954 as what Florence Knoll modestly referred to as one of the “fill-in pieces that no one else wants to do,” the Florence Knoll Sofa Collection now stands as a defining example of modern design. Consistent with all of her designs, the Lounge Collection has a spare, geometric profile that reflects the objective perfectionism and rational design approach Florence Knoll learned from her mentor, Mies van der Rohe.

Introduced in 1966, the Platner Collection of sculpted wire furniture captured the “decorative, gentle, graceful” qualities that were beginning to infiltrate the modern vocabulary. The Collection’s unique, harmonious forms are created by welding hundreds of curved vertical steel rods to circular frames.

An 18k gold finish option was added in 2015 to celebrate the 50th anniversary of the Platner Collection.

Antenna Telescope is a height-adjustable table system that combines the healthful ergonomics of adjustable height workspaces with the planning efficiency of benching, enabling users to independently adjust their worksurface from seated height to standing height with a powered electric or pneumatic control.

Antenna Telescope offers variable or fixed horizon privacy screens, modular power distribution to the desktop, integrated lighting and monitor support, and comprehensive wire management. Antenna Telescope is visually integrated with the broader scope of Antenna Workspaces

The Flex family of seating has evolved with the addition of the new collection Flex Executive. This collection consists of conference chairs and armchairs that are available in three backrest versions: low, intermediate, and high. Additionally, two versions of lounge chairs, with two distinct backrest heights, complete the collection. Additional options include back finished in walnut veneer.

Taking its cue from the shared society of today, Co-op is all about bringing people together. Designed to function equally well in existing or new spaces, these open to semi-private meeting enclaves can be positioned anywhere and require no elaborate construction to create a custom built-in feel. Supremely comfortable and exceptionally versatile, Co-op is the essential collective for communicating, working and inspiring one another to achieve more.

In 1966, the Platner Collection captured the “decorative, gentle, graceful” shapes that were beginning to infiltrate the modern vocabulary. The iconic pieces are created by welding hundreds of curved steel rods to circular frames, simultaneously serving as structure and ornament.

Dividends Horizon has the versatility to provide thoughtful primary workspaces for focus work and concentration, inspiring Activity Spaces to encourage teamwork and collaboration, and distinctive private office and conference spaces to support organizational structure and large teams.  A consistent aesthetic and a robust set of common components and finish options support the wide range of demands of a dynamic and evolving office design.

Rapidly changing technology, the competitive economy and a diverse workforce are driving organizations to reimagine their workplace to compete for talent, increase speed to market and engage their people. Dividends Horizon helps organizations accomplish these goals, balancing concentration and collaboration; structure and innovation; cost containment and attract and retain.

Celebrated interior designer Charles Pfister, whose personal design philosophy was “restrained elegance,” designed this perfectly proportioned lounge collection in 1971. The modular design offers long-term flexibility, while the timeless appeal and superb craftsmanship of the design reflect Pfister’s firmly held, and forward-thinking belief that: “There is a movement away from throw-away society, away from disposable possessions. Instead there is a mounting interest in useful, sculptural, wonderfully constructed objects … such objects are a triumph in any setting.” The lounge collection is available in standard and petite sizes, as well as sectional configurations.

Designed in 1960 and originally manufactured from 1964-79, the steel and leather ‘sling chair’ or '657', as it is commonly referred to, offers a refined combination of materials and finishes. Tubular steel legs connect to cast-aluminum arms and stretchers with exposed hardware, exemplifying Pollock’s ‘honest’ approach to design. Reintroduced 2014.

Ross Lovegrove, an industrial designer recognized for forward-thinking, organically-inspired products, brought his distinctive aesthetic to Knoll with the Sprite™ Stacking Chair — his take on the quintessential molded plywood side chair.

Dividends Horizon conference tables are available in racetrack, rectangular, or boat shape and in all standard Dividends Horizon finishes. A conference table base assembly includes two Y legs, one center support T base, and two horizontal stretchers that connect the three bases. Top sizes up to 120 inches are produced in one piece, while tops longer than 120 inches are produced in two pieces.

Antenna Simple tables are independent, linkable tables with a contemporary and neutral aesthetic. Simple tables are versatile, mobile tables with enhanced performance for office, higher education and residential applications.

With options to add privacy screens, modesty panels or power components, Antenna Simple tables support multiple modes of working within a single work environment. A user-friendly linking feature and continuous power capability supports adaptable Assembly spaces.

Marcel Breuer was an apprentice at the Bauhaus when he conceived the world’s first tubular steel chair. Inspired by the frame of a bicycle, a product he greatly admired for its functional design, Breuer saw tubular steel as a way of building a more transparent chair. Influenced by the constructivist theories of the Dutch De Stjil movement, Breuer took a familiar form — in this case the classic club chair — and reduced it to its elemental lines and planes. The composition of leather strips suspended on steel tubes was the first chair of its kind. Breuer later named the chair after Wassily Kandinsky, the first person to whom he showed the chair.

Antenna Y-base tables offer unobstructed knee space and advanced cable management in compact shapes designed for small workstations and meeting spaces. Y-base tables combine standard Antenna tops with a grommet centered over posts and integral wire management channel and a low-profile, three-spoke “Y” base or “bowtie” shape base. Round tables are available in low, desk and standing heights and track tables are available in desk and standing heights.

A modern, unobtrusive track system with the quality needed to pair with our 100% Design Felt Hanging Panels. The Hanging Panel Track System is available with multiple options that include up to five channels, ceiling or wall mounting, stationary or sliding and FilzFelt Hanging Panels attach with Velcro or grommets for easy hanging and removal for cleaning. Tracks come in custom lengths and are delivered assembled and ready to install. Please note that lengths beyond 19’-8” (6 m) will be delivered in multiple sections and single channel tracks do not include end caps.

Versatility is essential in today's business environment. Offering both visual and acoustical privacy as well as a comfortable hang-out space, the Assembli Collection, designed by Primo Orpilla, provides a seating system that fulfills the needs of people meeting and collaborating in groups as well as people working independently.

The Spark Series Chairs brings energy to every room or patio with its bright colors and unique personality. A perfect balance of design and utility, the chairs are pleasing to the eye, comfortable, and versatile.

Eero Saarinen vowed to address the “ugly, confusing, unrestful world” he observed underneath chairs and tables -- the so-called "slum of legs." A five-year design investigation led him to the revolutionary Pedestal Collection, introduced in 1958.

The Organic Chair – a small and comfortable reading chair – was developed in several versions for the 1940 ‘Organic Design in Home Furnishings’ competition organised by the Museum of Modern Art in New York. With its sculptural shapes, the design was ahead of the times. But due to the absence of suitable manufacturing techniques, the armchair never went into production. Not until 1950 did it become possible to manufacture and market organically shaped seat shells in large quantities, as exemplified by Charles and Ray Eames's famous Plastic Armchair or Saarinen's Tulip Chair.

Jens Risom’s furniture, the first collection designed for and manufactured by Knoll, helped establish the company as an early provider of modern design in America. The Lounge Chair's combination of gentle curves and geometric angles exhibit Risom’s Scandinavian design sensibilities.

A Womb Chair fit for two. We are very pleased to welcome the Womb Settee back to the Knoll line up. The design has been out of production, but never out of style. The double-wide design is the perfect modern refuge for the living room, bedroom or office.

Finnish designer Pasi Pänkäläinen offers a new take on the traditional café table with the versatile Arena Collection. The Arena tables are available in both round and square shapes, in dining- and bar-heights and a broad range of sizes. Tables feature a white laminate top with a natural birch edge, a steel column and round laser-cut footplate. The Arena tables are the ideal complement to the spirited CHIP chairs and barstools, and are suitable for corporate café and breakout areas as well as hospitality and residential applications.

The Antenna Workspaces system includes a wide range of tables and table desks suitable for every application in the office. The modular design of Antenna table components allows for the creation of nearly limitless configurations.

Options include two leg styles (Desk Legs and Table Desk Legs), four fixed leg heights, two adjustable height legs, and a vast selection of worksurfaces in varied sizes and shapes. Casters, screens, linking hardware and technology accessories expand the flexibility and functionality of the Antenna Tables and Table Desks collection.

Taking a sculptural approach to lounge seating, Aloft rises above the others to provide an awe-inspiring experience. An upholstered body, encased in elegant wood, is supported by a minimalistic metal frame to create a virtual suspension effect that defies gravity and captures the imagination.

The clean lines and pure shape of Sketch create a refined look that brings contemporary style to any décor. Available in several manifestations, the classic shape of the seat stays consistent throughout the line. Seven different base options give the Sketch family an elegant variety of styles.

Eero Saarinen designed the groundbreaking Womb Chair at Florence Knoll’s request for “a chair that was like a basket full of pillows…something I could really curl up in.” The fiberglass design supported multiple sitting postures and provided a comforting sense of security — hence the name.

Hung on the wall, Pannello Murale is space efficient and highly effective, as it absorbs sound on both sides and does triple duty as a sophisticated projection screen and tackable surface. This elegant panel is created with an aluminum frame that gracefully tapers to a thin profile masking a high performing sound-absorbing core of wood fibers and exterior covered in flush-mounted 100% Wool Design Felt. The Pannello Murale provides a beautiful, yet hard-working acoustic panel. Available in four standard sizes and 63 colors of 3mm Wool Design Felt.

The Diamond Chair is an astounding study in space, form and function by one of the master sculptors of the last century. Like Saarinen and Mies, Bertoia found sublime grace in an industrial material, elevating it beyond its normal utility into a work of art. Harry Bertoia’s wire chairs are among the most recognized achievements of mid-century modern design and a proud part of the Knoll heritage.

The MR Collection represents some of the earliest steel furniture designs by Mies van der Rohe. The material choice was inspired by fellow Bauhaus master Marcel Breuer, while the forms are thought to be modern derivatives of 19th century iron rocking chairs.

k. lounge is a modular, plannable soft-seating series that delivers a broad range of capabilities, making it the go-to solution for Activity Spaces throughout the work environment. With 11 modular elements, k. lounge bridges the gap between object-based furniture and a plannable system, making it applicable in spaces ranging from small enclosed Refuge spaces to large open Community areas.

Featured in nearly every Florence Knoll interior, the Saarinen Executive Chair remains one of the most popular Knoll designs. Originally introduced in 1950, the chair transformed the notion of what executive seating could be with its fluid, sculptural form and modern finishing. The timeless and versatile design continues to fit seamlessly into work, conference, lounge and dining applications of any decor.

A Plannable Storage System
A true hybrid product, Template brings Knoll systems expertise to the storage category, combing multiple storage and surface options to offer a unique kit of parts for designing open plan and private office environments.

Essentially a 15” thick panel, Template divides space and provides comprehensive storage solutions, including hanging files, simultaneously. Template integrates seamlessly with Antenna® Workspaces and Dividends Horizon®.

The compact, 15”deep footprint and dual-sided access give Template the versatility to be used in any workspace design: freestanding, as a spine in core planning, or as a workwall or architectural element in perimeter, team and private office designs.

The sophistication of Propeller Conference Tables is unparalleled. With a wide range of sizes, base options, and finishes, the Propeller Conference Table can easily be specified to complement a multitude of design aesthetics, ranging from clean and modern to rich and traditional.The modular design allows for configurations ranging from small to very large and the finish palette, which includes traditional veneers and contemporary metal options, brings a refined aesthetic to any conference room or boardroom.

Elegant and simple solutions manage technology and electrical components. Wires and cables remain hidden within the different base options, but are easily accessible when needed.

 With a wide range of sizes, leg options, and color finishes, the Propeller table can easily be specified to complement a multitude of design aesthetics ranging from clean and modern to a more traditional space.

Inspired by the functionalist vision of the modern masters, Reff Profiles tables deliver a progressive and architectural design solution for private offices, meeting spaces and open plan collaboration. Reff Profiles tables are offered in a range of dimensions, leg styles and finish options.

Unconventional simplicity. The space between the seat and frame defines the Alo Collection’s pronounced character – light filters through, creating simple, clean lines and providing a more comfortable and flexible sit. This classic and simple series of chairs is finely crafted, and a perfect fit for a variety of applications, from dining areas and cafes to reception and lounge spaces.

Jointly developed by Vitra and Antonio Citterio, the lounge chairs Repos and Grand Repos introduce a new level of comfort and flexibility to the home environment: with their generous padding, inviting armrests and high backrest, these elegant swivel-based lounge chairs impart an image of supreme comfort.

Peter Shelton and Lee Mindel removed mass, tweaked proportions and simplified lines to reinterpret the traditional banker’s chair, creating a contemporary chair that echoes the stance and stature of another era.The chair is exceptionally comfortable with a full, curved back available with or without an upholstered inner shell.

Responding to ergonomic research that challenges the idea that we only sit in a single forward-facing position, Generation is designed to support the range of postures and workstyles typical of today's workplace, allowing you to sit how you want.

Designed in 1930, the Barcelona Couch shares the same simple elegance as the iconic lounge chair of the same name. Mies van der Rohe's command of line and material in all medium, from architecture to furniture, helped define the modern vocabulary.

Inspired by the functionalist vision of the modern masters, Reff Profiles tables deliver a progressive and architectural design solution for private offices, meeting spaces and open plan collaboration. Reff Profiles tables are offered in a range of dimensions, leg styles and finish options.

Tip Ton defines a whole new chair typology: the solid plastic chair with forward-tilt action. Its name refers to the dual sitting positions provided by the chair – from a normal position, Tip Ton can be tilted forward a few degrees where the chair then stays in place. The forward-tilt position, until now the preserve of mechanical office chairs, straightens the pelvis and spine and thus improves circulation to the abdominal and back muscles.

Designed by Mies van der Rohe in 1930 for his renowned Tugendhat House in Brno, Czech Republic, the Brno Chair reflects the groundbreaking simplicity of its original environment. The chair, an icon of 20th-century design, is celebrated for its lean profile, clean lines and exquisite details.

Through decades of experience and accumulated knowledge, we understand that one planning model rarely provides a solution for the whole office. AutoStrada synthesizes 40 years of Knoll’s best ideas to deliver a comprehensive, architectural system that accommodates the full spectrum of your company’s workspace needs.

Designed with four planning modes — spine-based, storage-based, wall-based, and table-based — AutoStrada offers an aesthetically consistent design solution for the entire workplace. So whether you require a high-performance open plan system, architectural case goods, progressive private office furniture or a collaborative “big table” concept — or a mix of all four — AutoStrada is the answer.

Where other barstools fall short, Zia rises above the rest. Zia is subtle in its complexity, utilizing geometric shapes and gentle, sloping curves. The waterfall edge of the pentagonal seat is designed for the utmost comfort. The nuanced detail designs coupled with a wide range of finish options means Zia is versatile enough to fit in any space: from an elegant, contemporary office space to a fun, colorful café.

AutoStrada tables offer a portfolio of designs that complement any workplace environment. The rich material palette combines premium wood veneers and clear anodized aluminum to create elegant table solutions for offices of any aesthetic. Optional casters give the tables added mobility and modesty panels are available to create table desks.

The unsurpassed sculptural appearance of Fenix was labeled the true next generation of office seating. Wolfgang C.R. Mezger designed every component of the Fenix chair with comfort and luxury in mind. Beautiful form and fine tailoring are the hallmarks of the Fenix chair.

Designed by Mies van der Rohe in 1930 for his renowned Tugendhat House in Brno, Czech Republic, the Brno Chair reflects the groundbreaking simplicity of its original environment. The chair, an icon of 20th-century design, is celebrated for its lean profile, clean lines and  exquisite details. The Tubular Brno chair is available in thin- and thick-seat versions with hand-buffed stainless steel or mirror chrome frames.

Designer Vico Magistretti relied on the relationship between line and material as the foundation for this sophisticated design. The gentle curves of the molded plywood shell are accentuated by the X-shaped chrome-plated steel base, which is available with or without arms. Cirene stacks 10-high for compact storage, perfect for cafeterias and breakout areas.

Freestanding Y Leg tables include a worksurface and base assembly. All freestanding table sizes are available with two Y legs and a horizontal stretcher connecting the two columns. 24" and 30" deep tables are available without a stretcher. Tables without stretcher include an integral worksurface support plate. 36" and 42" deep tables are available only with a stretcher.

Designed by Marc Krusin in 2011, The Krusin Guest Seating Collection draws inspiration from traditional chair designs, but asserts itself with an industrialized craft aesthetic. Leaving no joint unresolved and no angle unconsidered, the Krusin Collection’s subtle elegance harmonizes with any setting. Further enhancing its versatility, the chair is available in a broad array of natural woods, with low-sheen or high-polish finishes and can be styled with an upholstered or natural woven paper rush seat.

One of the most recognized objects of the last century, and an icon of the modern movement, the Barcelona Chair is a tribute to the marriage of design and craftsmanship.

Super stacker that doesn't compromise on design or comfort. Stack up to 20 on trolly. Available with a polyamide or lacquered bentwood shell. Polyamide shell available in 10 standard colors. Chrome base standard. Powder coated frame available. Upholstered seatpad available.

As the first chair that fuses painted wood with wood veneer, Join not only defies convention but also ushers in a whole new approach to bent plywood technology. The unprecedented opportunity to mix and match shell materials fosters an aesthetic that is both ultramodern and unexpectedly retro. The generous contoured shape of the shell works beautifully with both the A-frame of the side chair and the spired base of the barstool.

Inspired by the functionalist vision of the modern masters, Reff Profiles delivers a progressive and architectural design solution for private offices, administrative areas and open plan environments.
Building on the Reff tradition of high-quality wood casegoods, Reff Profiles offers broadened aesthetic options and increased design flexibility, with components ranging from grounded work walls to freestanding desks and tables to support different applications, aesthetics and budgets. From the corner office in floor-to-ceiling walnut, to the fast-paced team space in glass and aluminum, Reff Profiles delivers.

Currents Tables include both Worktable and Desk solutions. Both are mobile, height adjustable and are designed for use with systems furniture, or as independent, collaborative tables.
Currents Tables offer an ideal assortment of mobile and adjustable height workstations for the modern ergonomic workspace.

The aim behind the structural design of AC 4 was to discreetly integrate the functional elements required for optimal comfort. Up until now, the design of office chairs has emphasised either their aesthetic appearance or their functional features. By contrast, the integration of ergonomic features in AC 4 is so subtle that its sophisticated structural components remain concealed. It achieves a balance between the most advanced ergonomic functions and an unobtrusive appearance: the innovative technical features of AC 4 are neither put on display, nor are they hidden beneath foam padding. AC 4 is an emblematic object with an elegant appearance and uncompromising functionality, ideally suited for refined offices and conference spaces.

With her typical modesty, Florence Knoll described her own line of desks as the “meat and potatoes” which had to be provided. “I did it because I needed the piece of furniture for a job and it wasn’t there, so I designed it.” While this may have been the motivation for the 1961 Table Desk, the result is anything but a fill-in piece. Perfectly proportioned and flawlessly detailed, the design embodies Florence Knoll’s adherence to the teachings of her favorite mentor, Mies van der Rohe.

Tone Height-Adjustable Tables offer personalized solutions for the workspaces, providing the ultimate in user comfort and adjustability. By accommodating a diversity of work modes, Tone supports a healthier and more productive work environment.

Tone Height-Adjustable Tables enable users to shape their space to support the work at hand. Recent studies suggest that moving throughout the day can have a positive impact on health and well-being. Knoll height-adjustable tables help to create a highly adaptable workspace, reducing discomfort by allowing users the freedom to sit or stand throughout the day.

Designed with a neutral aesthetic that integrates seamlessly with open plan, private office and Activity Spaces, Tone responds to changing dynamics in the workplace and supports an emphasis on advanced ergonomic performance.

The Martin Brattrud One Collection is designed by Collin Burry and Terry Walker. An elegant mix of exquisite precision and comfort, the One Collection offers lounge chairs, benches and tables that combine in multiple ways to create highly functional lounge and reception areas. Upholstered pieces in the One Collection rest on a sleek platform that gives the furniture its distinctive light, floating presence. The platform is available in brushed and polished chrome or wood; the base in polished or brushed chrome. Coordinating occasional tables offer tops in a range of beautiful materials including glass, wood veneer, Carrera marble and black granite.

Inspired by the negative space created by a canopy of tree leaves, Link is a freeform, modular system that plays with opacity and pattern. A hexagonal module is the basic building block of Link with perforations to soften the shape and allow varying degrees of light to pass through. The modules link together with tabs and slots and the product can grow or shrink as needed by adding or removing modules.

Link’s flexibility also allows the panels to be disassembled and reassembled in the future to provide varied sizes or patterning as needs change. This modular system can serve multiple functions, depending on the need: privacy screens, shade systems, room dividers, and acoustical elements and can be reconfigured in the future. Plus, it’s compatible with FilzFelt’s Hanging Panel Track System, allowing a complete solution.

The modules are CNC cut 3mm Design Felt with five transparency options ranging from 0 to 80% transparency. Several header options accommodate a range of assembled panels sizes including headers that link together and ending headers for the left or right sides. Five module styles and 63 color options assemble in a variety of different ways, making this product endlessly customizable. Any number of combinations of color and pattern are possible while being assembled of the same standard modules and header pieces. And by connecting multiple linking headers, large expanses of color and pattern can be created.

As an added bonus, Link is made from at least 25% remnant material. This post-industrial material is generated from our CNC cut products and projects and tends to be narrow strips that require smaller or modular products—just perfect for Link!

Alya is a collection of fully upholstered lounge chairs with solid wood or metal bases. Its serene silhouette embraces the body, inviting you to relax into its form. The Alya is born from the lounge chair archetype, but from a completely modern perspective. The design was developed from an ergonomic perspective and is suitable for contract spaces and residential areas alike thanks to its high versatility and two backrest options.

Part of the Happy family, Happy Armchair is available on both a steel sled base with mirror chrome finish or Polished Aluminum 5 Star spider base on casters. Happy has a comfortable seat made of moulded high resilience foam and concealed spring system. Alternate height adjustable chrome swivel base with casters available with rock/tilt.

Embracing the casual meeting concept, as well as the traditional notion of waiting or purely getting quality time alone, Nios is a captivating presence and a destination worth reaching. An artistic silhouette, together with a signature metal accent featured between the seat and back are but a few of its defining qualities, while book rack and rotating tablet accessory options add both functionality and versatility. A figure of beauty, Nios serves all purposes in comfort for today's ever-changing environments.

The Ginkgo Chair is an elegant yet durable bent plywood chair with an organic aesthetic that is both instantly recognizable and utterly unforgettable. The expanding Ginkgo family is offered with a variety of options: with arm or armless models, differing bases, and a variety of upholstery treatments.

Designed with a modern, residential sensibility, the Massaud Collection balances luxury and utility – beautifully crafted for comfort in the workplace. The collection provides design continuity with a global aesthetic across a range of seating solutions including lounge and conference seating.

Part Work. Part Refuge. Designed for comfort and connecting with technology, the Massaud Lounge, Work Lounge and Ottoman offer an alternative destination to work, contemplate or relax. The swiveling tablet brings work closer while settling back into a relaxed posture with the ottoman.

Martin Brattrud’s St. Germain lounge seating collection is designed to be versatile. With a comfortable loose seat and back, along with durable construction, it is ideal for lounge.  This line is offered as chair, sofa, bench and ottoman. The loose back cushion comes in plain or tufted versions.

Martin Brattrud’s Bristol Collection is a highly adaptable refined modular furniture system of seating and occasional tables. There are twenty standard seating styles and thirteen table styles, and both seating and tables have multiple options and variations. Utilizing Bristol’s flexibility, Designers can create an unlimited range of configurations that result in customized solutions to complement most any aesthetic.

The Veer Table is exceptionally versatile. Designed for cafés, casual settings, and formal meeting spaces. It includes several sizes in round, square, and rectangle tops and is offered with bistro height tables.

A new take on the classic club chair - refined and modern. A graceful volume in a comfortable, embracing form. Its compact scale invites group settings. Swiveling effortlessly, Joel automatically returns to center when guest depart. Join the club.

The goal for Share was to create a comfortable, easily understood, informal activity-based modular seating system that was also practical to reconfigure.

Open plan offices require multi-functional collaborative spaces where people can meet, exchange ideas, or simply recharge. As an activity-based, modular system, Share was developed to provide efficient, flexible, and inspiring use of this semi-private space. It is one of the very few lines that allow seamless integration of task and lounge height seating surfaces to create additional dimensions of use within the same location. This makes it possible to accommodate individuals who find it inconvenient to sit on or get up from a lower surface. The two heights also encourage mixing dining with casual work and conferencing.

Share embodies a soft, curvilinear aesthetic for harmonious visual interest without excessive ornamentation, making it suitable for most environments.

Because you were never designed to sit, we designed the You chair to help you sit fit. With its U-shaped back suspension, the You Highback chair introduces a revolutionary way of sitting that ‘lifts’ you into the proper position.

Dressed up for corporate and upscale environments, or casual for guest seating, auditorium, and dining uses. A complete portfolio of styles, configurations, materials, and upholstery to harmonize with almost any interior architecture.

Landscape Architecture. Luxurious yet practical, chic yet subdued, Circa Lounge System offers a dramatic creative palette for configuring signature spaces. Combine straight and curved seating modules with connector, storage, and freestanding tables for landscape solutions that raise the bar from every angle.

The Await Lounge System is the perfect solution for lobby, lounge, higher education and hospitality settings. Its staggered ganging capabilities exemplify versatility and functionality in transforming space. Sharp tailoring featuring topstitch detail speaks to the sophisticated styling of Await; the spring packs in the seats bring a new level of comfort. With power and data options, coordinated tables, Await creates contemporary niches of dramatic in-between spaces and casual conferencing.

Not your average stacking chair. With its unique shape, fully upholstered body, and double-needle topstitching, Capa adds contemporary style with practical comfort. Recessed side panels offer a comfortable resting place for arms without restricting postures. A flexible back molds to the occupant. At only 18 pounds, Capa creates an impact in a lightweight package.

From the renowned European studio of Lievore Altherr Molina / Barcelona, Enea Lottus is a flexible, multi-height collection of chairs and tables that integrates simply and cleanly with any space. Sculpted for comfort with just the right flex, the elegant shell of the Lottus chair can be used alone or customized with a colored insert or upholstered cushion. Chairs are available in armless, loop arm, and cantilevered arm versions. Comfortable and versatile, with a wide palette of color and finish possibilities, Enea Lottus is a new classic, embodying a sense of harmony and balance without a shred of pretense.

2gether creates dynamic spaces for people to easily connect and learn. Join them in rows for the next seminar, rearrange in groups to exchange ideas or fold them down and roll them away until needed. 2gether works great and looks great in any setting, any time.

The Reveal Collection is designed by Brian Graham. The Collection offers designers a unique concept of unlimited flexibility in seating and table configurations. The seating collection includes freestanding lounge chairs, sofas with low, mid, and high back options, as well as ottomans. Reveal's multiple back heights are standard with lumbar cushions and the option of throw pillows. Freestanding tables are available in varying heights, top shapes and sizes with centered as well offset base configurations. The distinctive design detail separation between the seat, back and arms is indicative of Reveal's name offering both design and functional attributes to the collection.

It's a simple thing done right. The right proportions. Flawless surfaces. Perfect structure. Squares or rounds at the floor with a gentle float. With all the popular sizes and heights to choose from, Swap is the table program that is sure to become your favorite spec.

Versatile, efficient, economical. Bungee comes complete with table tops, legs and Bungee cords, allowing quick and easy reconfiguring of table settings without using any tools. The multi-usage Bungee Tables are an affordable investment for growing companies looking for versatile and efficient meeting solutions. Ideal for classrooms, training rooms and boardroom settings. Moving from classroom to collaborative settings and back again is easy with Bungee. Individual tables are available in a wide range of surface shapes and are easily combined to quickly transform into whatever setting is required.

Bridges allows you to connect the dots in different ways from tables to benching, desking to systems.
Redefine how you connect and share. Bridges provides the tools for you to achieve so much more. Our task was to develop an environment for collaborative teamwork which would facilitate the connection of people and ideas in a corporate setting… to design a platform which would serve as a catalyst inviting people to engage and co-create.

A seating classic was born with the creation of Lipse. The unique plywood shell creates a distinctive design statement with its signature curvature and shape. The iconic details of Lipse make it instantly recognizable with the perfect multi-purpose design.

There are always times when budgets have to be stretched and solutions found. Popcorn seating combined with our classic Cafeteria tables are hardworking products that are offered in an array of contemporary colors and finishes to look your best.

Carola is a family of chairs and armchairs that stands out for its elegance and incomparable wood finish. Both the upholstered and oak veneered seat versions convey warmth and comfort. It is the perfect addition to any bright open area.

Manfred is a program of modular sofas designed to be used collectively or individually in large lobbies or relaxation zones of contract workplaces. The collection consists of an individual armchair and two or three sofas. Wood arms are available for all versions. The lines of the Manfred are defined by the padded body and make for a comfortable place to rest. The design is characterized by its large presence, comfort and adaptability. Manfred sits on a base that is slightly tilted inward, allowing for organizing and cleaning the surrounding space.

Design and mathematics converge in flexible, modular Bloomx. Named for it’s petal shape and the exponent ‘x’ representing infinite possibilities in size, color, and design, Bloomx is a flexible, modern screening system made from one repeated module. Designed by Italian graphic designer Chiara Debenedetti, Bloomx provides soft and textural space separation as eye-catching room dividers with an interesting play of positive and negative space. The single module—a clean, six-petal form—assembles with a simple tab and slot connection and openings between modules allow maximum light and sightlines to beyond. This clever product can grow or shrink by simply adding or removing modules. Add to the mix 63 colors of 100% Wool Design Felt that can be arranged in a variety of ways and this product provides countless sizes, shapes, and color configurations. Have a change of heart later on? The panels can be quickly and easily reassembled.

Kontour modular seating, with coordinating ottomans and end tables, can be arranged in limitless configurations to provide comfortable, functional seating options. Ranging from a small single unit to expansive configurations, the rectilinear and curvilinear shapes create strong visual interest while enhancing designers’ abilities to define spaces and control traffic flow in large public areas.

Akin to the brilliant light of a sunny day, Soleil illuminates with gracious beauty and a heightened sense of well-being. With keen sensitivity to its surroundings, this comprehensive collection first and foremost maintains a stylish, healthcare centric design. Its features support options for ease of maintenance and extended product life, yet the genuine comfort it delivers wholly defines its pure nature. Warm and inviting for either short or long-term waiting requirements, Soleil shines brightly in any environment.

Circo barstool has a solid beech wood base, displaying master craftsmanship and achieving a natural look. The sleek metal footrest puts a classic touch on the organic base, adding an intriguing visual detail. The scoop back seat offers the perfect amount of support and comfort.

Martin Brattrud’s K-2 Collection is available in stand-alone units, namely, armed and armless units, benches, banquettes. This style can sometimes be adapted to meet design requisites, such as non-standard back heights and widths. Details can be enhanced using multiple upholsteries.

The Serif Collection is designed by Lee Pasteris. The collection offers a broad spectrum of product options. Aesthetically, the collection has been reduced to what is most beautiful, the elegance in metal and upholstery craftsmanship. This collection whispers of poetic minimalism. The Serif Collection consists of lounge chairs. sofas, benches and tables. The frames are available in polished or satin stainless steel as well as hand rubbed finishes in black or charcoal on steel. Coordinating occasional tables are offered with two different bases and a range of beautiful material s for the tops including glass, wood and stone options.

Products designed by Hella Jongerius exhibit her unique manner of fusing industry and craft, high- and low-tech, traditional and modern – characteristics which are also evident in the East River Chair: with its distinctive form and casual combination of such diverse materials as wood, metal, leather and fabric, this small armchair clearly bears the Dutch designer's signature.

Thoughtfully refined to invite and embrace, distinctive in both the workplace or residential landscape, with a molded plywood form and ample seat for easy movement and casual comfort. Lounge and guest/dining height models can be intermingled to create a complete solution for relaxed, elegant meet/eat spaces.

Amoebe was created by Verner Panton in 1970 for his famous Visiona installation, which included several versions of this lounge piece. It embodies the exuberant spirit of the early 1970s. Thanks to its upholstered surfaces and the flexible back shell, Amoebe offers a high level of comfort.

The Amoebe Highback version of the chair has a flexible backrest that curves over the head of the sitter, forming a sculptural canopy. This striking accent gives the chair a sense of shelter and seclusion.

A sleek architectural masterpiece, Together elevates the upholstered bench to an impressive new height while reinventing the corner seat. Corner shapes define space and create rooms within rooms; straight benches offer open seating. An inviting destination with a statement of intent: meet. The Together bench makes itself at home in every setting.

A sofa can go beyond being a mere piece of furniture to become a room within a room. This was the idea that inspired Ronan and Erwan Bouroullec in their design of the Alcove Sofa. With its comfortable seat and backrest upholstery and the high, flexible side and back panels, the Alcove Sofa creates a sheltered niche of privacy, a place of retreat. The Alcove family features a variety of different sofa models for use in home interiors as well as office environments.

As 100% Wool Design Felt is a nonwoven textile, it does not fray and allows for applications and installations not possible with any other textile. Felt may be custom CNC cut to exact specifications. CNC stands for Computer Numerical Control and uses a blade to provide intricate and accurate cutting. Think custom shapes and intricate patterning for wallcovering, exhibition displays, seat pads, architectural installations and let your imagination run wild! CNC cut Design Felt requires a vector drawing submitted at time of order placement and please note that all projects must be quoted.

The seat construction of the Softshell Chair ensures a level of comfort that is first revealed upon use: vertical ribs concealed in the back shell adapt to the user, providing freedom of movement as well as superb comfort, even for prolonged periods of sitting. The smooth contours and appealingly soft upholstery over the entire surface give the Softshell Chair its calm, cosy and inviting character.

The Zooey chair is a contemporary side chair available in an array of mesh back color options. Metal frame is standard with black finish, but available with optional tungsten or chrome legs. The breathable mesh back allows continuous air flow to eliminate heat build-up. Mesh back available in a large variety of colors.

Strong and accommodating, the SW_1 chair is designed for standard-height tables. It works well with a desk, as a side chair, or at a conference table. Pull several together for meetings on the run. Two swiveling base options: height-adjustable caster base or glides. The mesh back adds breathability and an extra measure of comfort. Upholstered in fabric or leather, with a choice of nine mesh colors, the SW_1 chair offers a wide range of expressive possibilities.

The Kurve Collection was designed by Alan J. Dandron and Avery Handy. The sculptural lounge chair set on a stainless steel four star base with a auto return swivel mechanism. The Kurve Collection is a fresh approach to the existing linear forms of previously introduced Martin Brattrud product offerings. The sculptured aesthetics of the Collection achieves a new distinction for MB. The addition of the Kurve Collection compliments MB’s other linear product offerings as much as the collection making a statement about MB’s philosophy to create products which embrace and integrate with interior landscapes.

The Kurve Collection possesses a special quality that stimulates our aesthetic senses. The lounge and tables were designed to capture the eye and stimulate our interest to view the products from every angle. Every detail in the collection, lounge and table, has been meticulously designed and crafted.

The Links Collection, designed by Richard Riveire, is a highly flexible and refined modular furniture system of seating and occasional tables. With these tools designers can create an unlimited range of configurations that result in customized solutions to complement most any aesthetic. The minimal profiles and elegant proportions of each component allow them to work independently. Their impact is greatest as an ensemble. When so configured, the vast array of materials, trim details and options, flow seamlessly with one another. The Links Collection represents the ultimate opportunity to create a highly tailored lounge setting.

Alero's fully upholstered or breathable mesh back and visually sculptured lumbar adjustment create the perfect blend of comfort and design.

Aspen's unique form-fitting back profile is the result of years of extensive design and testing to determine the optimum support for the widest possible range of users and body types. The back can also be easily and quickly adjusted in height to provide full contact with the lumbar. Aspen is a chair that not only "fits" at the beginning of your work day, but also at the end of the work day when you need it most.

Ballara is an all inclusive, modular furniture series which integrates soft seating, storage, work surfaces and power capabilities. It satisfies many space planning scenarios including corner, in-line, open concept as well as traditional reception. Furniture pieces can be used as standalone items and can be linked together to form infinite seating configurations. Ballara responds to the idea that lounge spaces are becoming important social and collaborative areas within offices.

G20 - the highest quality office seating created to bring harmony to form and function. G20 is a synchronized tilter that adjusts to body weight automatically. Advanced Ergonomics. Technically superb. Wide sweeping cast aluminum lines with delicate edge details are carefully integrated with stylized nylon components to create a crisp, simple profile. As the G20 back smoothly tilts, the synchronized mechanism allows the seat to gently recline and slide to the rear.

This award-winning series features classic styling with a finely detailed polished aluminum arm. The sling style back is upholstered with rolled and pleated details, and is available in an array of fabrics, vinyls or fine Italian leathers. Clean simple lines make Global Accord the perfect choice for meeting rooms, boardrooms and private offices.

Jeo is a retro contemporary series offering design versatility for a number of workplace applications. The cube design looks great and functions well in lounge, conferencing, collaborative and small groups, or even side/guest environments.

Automatically the right tilt-tension for every user! Mesh Back is available in wide selection of Vue mesh colors. Loover seat can be fully upholstered in fabric, vinyl or leather. A live lumbar support is incorporated into the back design which is height adjustable via a concealed ratchet system. Side-activated sliding seat depth adjustment is standard on Multi-Tilters and Synchro-Tilters. G5 lockable armcaps are height, depth and width adjustable to suit user preference. Five-legged, injection-molded, fiberglass reinforced, Nylon "Governor" base. Available in polished aluminum finish. Loover is equipped with Global's high quality Soft Descent (TM) pneumatic lift which slowly and gently lowers the seat height of the chair making it easy to obtain the exact seat height desired.

M9 seating was developed and engineered for moderate to high task usage. The series includes a high back task chair with adjustable headrest, a mid back task chair and side chair. Side chair is made with a plastic shroud with polyurethane armcaps and injection molded plastic backrest.

ML is a contemporary interpretation of classic minimalist styling and is well suited to reception areas, modern offices and hospitality applications. ML brings an international flair to any corporate or hospitality comfort setting.

Princeton is a freestanding and fully modular collection offering maximum flexibility; ease of installation and facilitates simple reconfigurations. Over 1000 components offering endless possibilities to fit you and your space. No cubicles or panels needed for configurations. Product can be added and reconfigured as needed. A variety of storage options allows you to do more with less space.

A modern club style series, with a bucket seat and a curved back to provide continuous comfort and support. Fixed cushions and a webbed suspension provide extra support and durability. An attractive black foot provides added stability and a slightly elevated look.

Swap tables. It's a simple thing done right. The right proportions. Flawless surfaces. Perfect structure. Squares or rounds at the floor with a gentle float. All the sizes. All the heights. All the finishes. It's the table program that is sure to become your favorite spec. Casual meeting and cafe tables suitable for a variety of applications: break rooms, meeting rooms, private offices and more! Tops and bases are sold separately for easy specification. Mix and match capabilities to create spaces for multipurpose use.

Vion offers a clean transitional design, exceptional comfort adjustments and tremendous value. Vion is a comprehensive seating series offering a family of models to address multiple applications: task, management, conference, guest, heavy duty 24-7 and drafting stools. Series offers mid and high back models with mesh or upholstered backs. Five different control mechanism options to suit all price points and ergonomic requirements. Synchro-Tilter with Back Angle Adjustment, Weight Sensing Synchro -Tilter, Multi-Tilter, Tilter and Task.

Wind Linear is an extension to our very popular Wind freestanding soft seating series of sofas and arm chairs. The seating is connected with the new letter box tables to create the linear arrangements that define the latest trend in office and hospitality lounge environments.

Zira Casegoods have a 1.5" thick boardroom table tops with choice of 4 top shapes: Boat Shaped, Bow End, Rectangular and Racetrack, offered in 96", 120", 144", 168", 192", 216", 240", 264" and 288" lengths.

Burkhard Vogtherr, creator of several iconic Davis pieces, designed an instant classic with the Body chair. This design continues to stand the test of time with a family of executive task chairs that offer extreme passive ergonomics and clean European styling.

Mez is a perfect balance of hard edges, soft curves, and interesting shapes. This table series creates an appealing aesthetic in cafes, bars, collaborative areas, and small meeting spaces. The Mez Series continues to grow, from the most petite café tables to double-based meeting tables reaching 120 inches in width. Mez is also offered with power surface options.

PLC combines sleek, modern design with solid oak construction. A rounded backrest and curved seat provide added comfort and support. An oak veneer keeps the look muted and natural, while a variety of painted finishes bring a vibrant splash of color to any space. A coordinating dining-height table completes this simple, beautiful look.

Prat is the iconic reimagining of a classic table design. Clean and simple, Prat tables are unhindered in the beauty and sleekness of its design. With a broad range of functions from conference rooms to cafes, Prat is one of Davis’s most highly customizable pieces.

Tre barstool is offered in bar, counter, and lounge heights, taking Tre into a variety of areas and occasions from casual, collaborative workspaces and libraries to corporate cafes and hospitality settings.

Taking Tre’s molded plywood technology to the next level, Tre Bar Table is the counterpart to Tre barstool. Offering a magnificent complement to the popular line, this bar height table opens a world of opportunities to the Tre family.

Casual meetings can be the most productive – yet the furniture tends to be uninspiring. Montara650 is a refined alternative. Infused with comfort and craft, the collection’s sculpted seating pairs with simple pedestal tables, filling informal spaces with café-style character tailored the way you want it. Simple. Social. Refined.

Stackable doesn’t have to be predictable. Montara650 is a well thought-out solution to a growing workplace need. The durable oak-veneered plywood shell is comfortable on its own and more so with a seat cushion or upholstery. Warm and appealing, Montara650 is a touch of luxury at an affordable price point.

Simple yet engaging. Solid yet open. Both surface and storage. Sebastopol redefines the occasional table. It moves easily and invites interaction. Pull it closer to make it your own. Push several together to create a generous centerpiece for groups. Wherever it lands, Sebastopol ignores convention. The surprising interior gloss either contrasts or converges with your exterior veneer choice. The optional grommet and PowerPod make Sebastopol Table a convenient charging station. Two heights. Two shapes. Many possibilities.

Wrapp Chair combines a snug winged back with a generous contoured seat, inclined slightly for comfort and support. A clean and elegant, fully upholstered chair for a multitude of uses. In leather or fabric, with environmentally friendly trivalent chroming.

With its stackability and wide-ranging choice of materials, Brooks is a sensible option for a broad array of multi-use requirements. The line’s chameleon-like flexibility makes it easy to specify the right model for cafeterias, work/lounge locations, executive dining, and numerous other uses. In fact, Brooks’ high level of finish and resolved aesthetics open the door to many guest applications as well.

Multi-layer, sculpted back construction using tensioned elastomer and upholstery over a cushioned frame.  Each model offers a broad range of size, performance, and aesthetic options, including mix or match seat/back/arm cap upholstery with coordinating or contrasting textiles and leather.

Available in stacking or non-stacking models: arm, armless, and stool. Upholstered seat with either upholstered or wood back. Optional upholstered arm caps. Frames are crafted from 16-gauge steel tubing with carefully polished joints throughout. Chrome, Satin Chrome, or Powder Coat finish available on frames.

An outstanding combination of ergonomics, performance, and personality expand the possibilities for plastic stacking seating. Comprehensive, flexible back support inspired by task seating ergonomics. Space-saving design to reduce storage requirements (just 79” needed to accommodate 45 non-upholstered, armless chairs).

Designed by award-winning architect Sava Cvek and backed by more than half a century of Stylex know-how, SAVA® represents a revolution in control, comfort, and movement. Its groundbreaking Balanced Tilt mechanism functions through a set of user-friendly, clearly visible paddle adjustments to optimize the seated experience. With its flexible seat pan and a back that pivots around a forward point under that seat, the chair delivers correct geometry to achieve a grounded, remarkably responsive ride that is both poised and effortless for a wide range of individuals. In fact, SAVA has been fully tested for users up to 325 pounds.

Beautifully structured, with an emphasis on subtle details and expert craftsmanship, Avelina is more than a pretty face. Concealed wire management, tech-friendly options and adjustable glides are among its true strengths, followed by its broad range of flexibility in sizes and finish selections. Well-suited for casual meeting spaces, co-working stations, collaborative areas and more, Avelina is the winning combination of style and substance for today's evolving workspaces.

Combining balance and geometry with an ultra-modern vibe, Infinium offers compelling visual elements at every turn. While its distinctive front leg design supports the form, the legs themselves all but seem to disappear when viewed at different angles, creating a mystifying visual. Dramatic from all sides, this stunning display of innovative products seamlessly complements one another to deliver infinite possibilities.

Combining balance and geometry with an ultra-modern vibe, Infinium offers compelling visual elements at every turn. While its distinctive front leg design supports the form, the legs themselves all but seem to disappear when viewed at different angles, creating a mystifying visual. Dramatic from all sides, this stunning display of innovative products seamlessly complements one another to deliver infinite possibilities.

Casual takes on new meaning with Vero, a collection of meeting tables that adds a heightened level of sophistication without all the formalities. Its signature base design is all about delivering power, from the raised 4-prong pedestal that accommodates floor monuments to its center column for housing cables. Yet, each table remains light in scale and offers a diverse menu of shapes, heights, sizes and finishes to fit in anywhere. A veritable meeting solution for all manners of gathering, Vero makes it easy to achieve purposeful and productive interactions every day.

Brandy is a highly versatile collection of armchairs and lounge chairs with an embracing and comfortable body. This large collection of seating is constructed of an upholstered oak plywood shell, with flexible foam and either wood or aluminum base. The Brandy Collection is suitable for corporate, residential or public spaces.

Lineal Comfort is a collection of upholstered chairs, seats, armchairs and barstools. The design is constructed from flexible injected foam with either solid wood, steel or aluminum polished metal bases. It is an ideal addition to any private, public or space. It utilizes the pure forms from the Lineal family of seating with a luxurious, resistant and comfortable materials. It is featured in a wide range of upholsteries and wood finishes, increasing its versatility and ability to integrate into architectural spaces of very different styles and purposes.

Closed is a family of tables with balanced proportions, sculptural shape and technical detailing that make it an exceptional design for any environment. Design and functionality are combined using a system of integrated connections resulting in a highly adaptable piece for any meeting space. In additional to the wide range of heights, widths and lengths options, the family also includes a bench with cushions. Each table is constructed from 100% FSC certified wood utilizing a high level of woodworking experience.

Lounge chair with upholstered seat and backrest and 4-legged aluminum injected base available in different finishes.

SIT is a collection of chairs, armchairs and stools developed with many possibilities in both materiality and use such as gathering spaces and other contract applications. Sit in all its versions (Wood, Mix, Soft...) adapts without losing its characteristic lightness or personality. It also meets the most stringent durability requirements and is made from recyclable materials manufactured in an environmentally friendly manner. The collection offers an additional UV resistant version for use in exterior applications and with option to apply a special fire resistant treatment.

Traditional Japanese and Scandinavian design elements are brought together to create the Smile Collection. The design proves that lightness can be dynamic. Strength is obtained from the precise form and fluid structure, locked in a manner that makes this chair very resistant and durable. Smile offers stacking chairs, armchairs and stools with beech frame and back and oak or upholstered seat. Two different back options are spindle back or veneered panel back.

Looking cool under pressure while keeping an eye on the bottom-line, Zip® Conference brings confidence, contemporary design and comfort to the boardroom.

Breathable, flexible and lightweight, Inertia® Conference Midback perfectly adapts to conference environments.

Multiflex is in a class of its own thanks to the Flexion seat that passively flexes with downward and forward movement. Plus it features a molded seat back that pivots backward and forward, providing continuous support as it conforms superbly to body movement.

Business is a meeting of the minds. Requisite is a series of seating solutions that bring together creativity and economy, innovation and stability, first and lasting impressions. All equate to an ideal solution for conference or executive spaces.

7-Arm available only with the Synchro Tilt.

Loop Arm and Upholstered Arm available only with the Knee Tilt.

The Tuck® Stool is conveniently designed so it's there when you need it – wherever you need it – and conveniently "tucks" away when not in use.  The bar height design is ideal for cafés, lobbies, or high-top table applications.

With a sculpted metal frame, flexible features and broad fabric and finish selection, Twist is ideal for conference and hospitality environments.

With its patented mesh technology, Viva® features a boldly designed back that automatically self-adjusts to your body type and movements.

Fluid Basic Side combines the signature, streamlined design of  the Fluid® series with a basic mesh back and upholstered seat.

No one likes to wait, but with its webbed seat suspension, and sturdy steel construction, Foster Guest makes waiting more comfortable.

Ayr® instantly stimulates interaction, collaboration and learning by providing greater comfort. The series of contoured depressions in the seat and back passively flex to improve airflow, enhance circulation and reduce fatigue.

Designed by MostModest, the Tombolo sectional allows for infinite floor plan flexibility. With both linear and curved elements, Tombolo fits any need from lounge to cafe to large public spaces. Through material and color, the designer has an unlimited palettein which to create interiors from the subdued to the expressive. Wood contrasts with powder coated metal creating a warm and engaging sofa collection. Ingegrate table surfaces to create the ideal relaxed working environment. Contact HighTower project management for assistance with sectional specifications.

The Eyes family of seating, designed by Foersom + Hiort Lorenzen, seems to have a personality of its own. One that offers a comfortable, molded foam seat for a variety of applications. Simple, sophisticated and fun, the Eyes family adds an updated, retro touch to all spaces.

The structure of Physix is based on the idea of creating a continuous seat shell by stretching a single textile panel between two side members. With its design, the chair assumes its place in a long line of iconic chairs while taking the typology to yet another level.

Using state-of-the-art materials and production technology, Alberto Meda orchestrates an interplay of three elements to create a new dynamic sitting experience: a flexible frame construction, an elastic cover and a stabilising mechanism.

Joyn is more than just office furniture. Joyn is a management instrument in an era of a changing work culture because Joyn combines a variety of room functions on one single level: the platform. Its mobile and modular structure spontaneously adapts to the changing requirements and technologies. Joyn reflects the dynamism of the modern office. The room for every workstation is given flexibility.

On this basis Joyn gives office planning brand-new perspectives. One and the same configuration support both a high and a low usage density.

The useful accessories, as well as the cleverly designed electrification and cable management solutions, make Joyn a highly flexible system that can be easily reconfigured time and again. Single Desk, Single and Conference Bench or micro-architectural additions complete the range.

HeadLine not only provides optimal support in the lumbar zone, but also targets vulnerable areas that have previously been neglected – the shoulders, neck and head. In this way, it fulfils the ergonomic requirements of modern office work. In an upright sitting position, the head and spine are naturally balanced. But when the sitter leans back, most conventional office chairs do not provide sufficient support, resulting in strain and tension in the neck and shoulders.